Just curious; did the "set of flies lost/severely delayed in the mail" have a tracking number?
I’ve tied with bobcat, it was much like using rabbit…dubs nicely with some spikiness, in a dubbing loop. All that would be fun to experiment with.Gotta give credit when due, the usps successfully delivered this care package from Alaska today. Lynx, mink, ermine, squirrel, bags of grouse feathers, 2 bags of snowshoe hare feet in borax. I need to wash and lay the Hares feet out to dry for a while.
View attachment 103727
Any fly patterns use lynx or ermine?
First, I like your post office delivering double! Second, I'm sure there are patterns that could use ermine and such. I'm coming up with fly patterns using American Bison hair/wool (I'd just LOVE to get some of the sock yarn in bison to tie with!). Just look at the hair AND fur's characteristics in the water and tie from there.Gotta give credit when due, the usps successfully delivered this care package from Alaska today. Lynx, mink, ermine, squirrel, bags of grouse feathers, 2 bags of snowshoe hare feet in borax. I need to wash and lay the Hares feet out to dry for a while.
View attachment 103727
Any fly patterns use lynx or ermine?
Don't worry about ignorance - with me around you have good company! My Mom was a school teacher and she always said that the ONLY dumb question is the unasked one! (Besides I am loaded with dumb answers when needed!) My goof for not letting you know WHAT I sent. It's poly (polypropylene) cord. It can be used 3 different ways in fly tying - as the full cord (mainly used as the fly body with the back singed together), separate yarns (each cord has 8 yarns = ~16' of poly), and as dubbing (cut to no less than a 1/2" length and separate into fibers). Poly is lighter than water so it is a useful material for dry fly bodies, wings, and tail/shuck materials. A couple good patterns that use poly are Josephine Sedlecky-Borsom's Hot Mustard and Lee Clark's Stonefly series. Here's the Hot Mustard tied to imitate the Little Yellow Stonefly:Wooaaa....!!! Flies arrived in today's mail. Wow, what a nice assortment! Kim, I think you did the best job of hosting a swap that I've ever been involved with. So, BIG THANKS for a job really well (& thoughtfully) -done. Nice gesture on your part for sending your "five reds" .......... But (& pardon my ignorance) how are they intended to be used? - and what are they made from? I just hope I'm not the only one admitting to this ignorance.......
And, THANKS!! again.
Thanks for taking the time to offer such a thorough response. I thought dubbing might be at least a part of the puzzle. And, having grown up in Michigan, I'm just a bit curious about this "Jo" person. Where was her Sports Shop?Don't worry about ignorance - with me around you have good company! My Mom was a school teacher and she always said that the ONLY dumb question is the unasked one! (Besides I am loaded with dumb answers when needed!) My goof for not letting you know WHAT I sent. It's poly (polypropylene) cord. It can be used 3 different ways in fly tying - as the full cord (mainly used as the fly body with the back singed together), separate yarns (each cord has 8 yarns = ~16' of poly), and as dubbing (cut to no less than a 1/2" length and separate into fibers). Poly is lighter than water so it is a useful material for dry fly bodies, wings, and tail/shuck materials. A couple good patterns that use poly are Josephine Sedlecky-Borsom's Hot Mustard and Lee Clark's Stonefly series. Here's the Hot Mustard tied to imitate the Little Yellow Stonefly:
View attachment 105412
Mustad 94840, 16
Black thread
yellow poly
grizzly hackle
NOTE: Jo, as she was known in her Michigan Sports Goods Store, was known for three things: she ALWAYS used Mustad 94840 hooks for her fly patterns, she used all material from her hunts as well as other hunters in her area as well as having agreements with the chicken producers in her area. Lastly, she would tie with ANY color thread, as long as it BLACK! (With my condolences to the Model T!)
Lay a thread base, anchor hackle at back of hook, tie in poly with spiral thread wraps, fold poly back on itself, spiral hackle following the thread wraps, tie off hackle and trim excess, whip finish.
Here's a couple of Lee Clark's familiar Stones:
Golden Stone
View attachment 105413
Salmonfly
View attachment 105437
To best use the poly cord. Take a dull (rounded) pointed object and while holding the cord upright in your hand count down about 2 yarn crosses from the end and stick the object in and pull straight up and out of that end. Poly is a hard and slippery material so the pointed object should move easily out the top and separate the yarns. If it sticks, pull the object back and out of the cord, turn the cord about 90 degrees and try again. Once the yarns are separated simply grab one and pull it straight out and use. I use either a crochet hook or the bottom end of my whip finish tool as the pointed object. Also, if you wish to work with a straight length of poly - simply take a piece of corrugated cardboard and cut a short slit into each end and slip one end of the poly in one slit (the poly should seat in the slit without slippage) and repeat on the other end using the cardboard as a stretcher. You can use the poly the next day. Leave the rest of the cord in place for ease of storage and pull out yarns as needed and if the ends start to become ragged you can simply repeat the separation process on the other end and pull from that end. Lastly, if both ends fray too much cut off a 1/2" or so from the ends for poly dubbing and repeat the separating process on the newly cut end.
I am happy to share poly with anyone and I have been going through my 25+ colors by giving them a s swap gifts - usually 3 colors at a swap. A few years ago I bought a lifetime supply (100 yard skeins of 8-ply cord for each color), well, it would have been a lifetime supply if I were 20 years old, NOT the ~65 I was when I ordered! I figure the $2.50 to $5 amounts I'm sending per color will help offset the higher postage rates AND, after a couple years, give me a room in my house!
One challenge I've found when introducing my swaps to a new site is keeping within a particular timing that I did NOT follow this time. I want to thank you all for your patience through this swap. I normally will get the flies out no later than 2 weeks after the flies-in-by date while I try to balance the special situations that some swappers run into during a swap with the need for me NOT to hold the rest of the swappers in limbo by not sending out the flies. I missed my usual 1 week notice and that was my oversight. I am human but I will say that this was NOT my normal way to run a swap and I will not let this over extension happen again.
I hope this info helps you out.
Kim
BTW, I loved seeing the ties as they came in, glad you feel the same and I hope we get to swap again! Next swap on the books in another week or so.
Very sorry to hear it. Warm thoughts to his friends and family.This is a family member posting on behalf of wwKimba. I regret to inform you that he passed away March 19th, 2024. I will be posting more information when it becomes available. If you have any questions/concerns please email flypantrybook@gmail.com
Sorry for your loss. This "First Place Swap" hosted by Kim was indeed my very first swap. He made participating easy, fun and rewarding as I'm sure he did for countless others over the years.This is a family member posting on behalf of wwKimba. I regret to inform you that he passed away March 19th, 2024. I will be posting more information when it becomes available. If you have any questions/concerns please email flypantrybook@gmail.co