CHARt topper

I have been on a low-key mission to shake fins with a WA mackinaw for a couple of years now. Last year was my first true attempt and a pretty disappointing one with nary a bump from the depth dwellers. This year I went in with more of a plan targeting a shelf between 30 and 40 feet deep. Which is a really long wait even with a type 6.
Screenshot_20230416-104530_Gallery.jpg
This hike is loved by seasoned outdoor enthusiasts and the woefully unprepared alike (I saw someone "hiking" in leather pants.) Crowds are thankfully thinner at the lake. This has become an early alpine lake season trip to knock off the wintertime rust. With float tube, fishing gear and etc makes for a moderate to strenuous hike.

From the launch, I was almost immediately rewarded with a scrappy cutt that I think bit off a little more than he could chew.
20230415_092800.jpg

Soon enough we make it to the water above the shelf and I start the "dredge"- Lots of line out, long wait, then strip in about 10-15 feet, let it back out, fin a little, then strip in some more, change direction, and rinse and repeat.

Soon I was into something heavy, that didn't want to budge. I cleared my line and got the fish on the reel. With a DEEP bend in the glass 6wt, I finally saw my quarry come up close enough to get an ID that it was indeed the laker I was hunting.
20230416_120555.jpg

At this point, I am excited and a little scared. Something is going to give. Either the rod, the knots in my 3x flouro, or the fish. Each time I got him toward the surface, he would take a hard dive straight for the bottom. I was incredibly surprised. This fish had the fight of a large brown but with more juice in the tank. So much fun. After a lifetime or 5 minutes, not sure, I got him in the net. (glad I packed the bigger boat net.) Wowee, absolutely gorgeous specimen of invasive species. no official length, but he was too big for the stripping apron, so around the 2-foot mark. give or take. After a couple photos, it was released back to the inky depths.
20230415_101943.jpg
20230415_101947.jpg
20230415_101950.jpg

With adrenaline still surging I caught a couple more feisty cutts, but my day was done. Despite the sore shoulders and cranky knees, I'm ready for the next Mack Attack!
20230416_120515.jpg
 

Tom Butler

Grandpa, Small Stream Fanatic
Forum Supporter
That's awesome!
1666713509952
 

Squatchin

Life of the Party
Forum Supporter
I've been thinking about trying to jig one up. Type 7 with a long flouro leader and the Garmin. Some bucktail whitefish coloration jig and drop it right on their head. 50 feet would be pretty easy to reach.
I've certainly thought about that as well. With Sonar it makes more sense. Otherwise, a more horizontal presentation would seem to increase the chances of getting the fly in front of a fish.

This Shooting head from SA with a thin running line would get you down in a jiffy and would hold that straight-line presentation well. Something like a short 8wt or 9 wt you would be in business.
 

Buzzy

I prefer to call them strike indicators.
Forum Supporter
Awesome, what a tail, small wonder the fish put a hell of bend in your rod.
 

tkww

Steelhead
This is great! I have a plan to try this summer. Unfortunately everything around me that has them is big and deep and I don't have a powerboat. But I have some alpine options that I'll turn into a backpacking trip. Nicely done!
 

Squatchin

Life of the Party
Forum Supporter
This is great! I have a plan to try this summer. Unfortunately everything around me that has them is big and deep and I don't have a powerboat. But I have some alpine options that I'll turn into a backpacking trip. Nicely done!
Do it!
 
Top